ATEX diffusion h2s gas detector for toxic gas

H2S gas detector 1. Smart sensor technology 2. Long range signal transmission 3. LCD display 4. Anti-proof design

ATEX diffusion type h2s gas detector for toxic gas

This Toxic gas detector with LED display and Remote control is our best detector. It can work alone,and also can network with gas monitoring system. Our gas monitors which can network  this model are JB-TB-AT2020DH and JB-TB-AT2020FH.

Feature:

1.LCD display ,can display real-time gas concentration.

2.With Fault and Alarm indicators.

3.With Remote Control. You can calibrate the detector without opening cover.

4.Adopts imported sensor with high measurement accuracy, high stability, strong anti-poisoning and anti-interference ability.

5.Automatic recognition and protection the concentration of sensors , short-circuit and open-circuit of sensors, and automatic fault detection .

6.Explosion-proof design, it is suitable for II gas environment

7.Adopts HBUS four buses communication mode ,power wire and signal wire both use non-polarity design.And with automatic protection function to avoid damage to hardware caused by short -circuits in the use

8.Built-in passive switching output. Not only can achieve the connection with Sound and Light Alarm, but also 

 achieve site control.

9.Double G 3/4" joint design, not only achieve the interconnection of bus system, but also can connect Sound and Light Alarm.   

10.Intelligent sensor, replace sensor without demarcating.

11.Pipe-mounted and wall-mounted optional.

 Technical:

Model No.	XP3000/L	Power consumption	≤1.5W(DC24V)
Detection principle	Catalytic  / Electrochemical /Infrared/PID	Working voltage	DC14V~35V( detector terminal)
Communication mode	HBUS	Contact rating	2A/DC24V
Install screw thread	G 3/4” internal thread	Dimension	168mm×100mm×175mm
Weight	1.10 kg	Body material	Aluminium
Explosion-proof sign	ExdIICT6	Protection class	IP65
Display mode	LCD	Alarm relay	Normally  open
Gas Sample mode	Natural diffusion	Detection Gas	Combustible gas, VOC (Certain Organic Vapors),H2(ppm),CO,H2S,O2(VOL),NH3(ppm), Cl2,NO, CO2
Working condition	temperature:-40°C~+70°C(Catalytic); -20°C~+50°C(Electrochemical),-20°C~+55°C(PID),-40°C~+70°C(Infrared) humidity:10%~93%RH(incondensable);  pressure range:86~106kPa

ATEX diffusion h2s gas detector for toxic gas